| 1. | Doorsets - diagonal deformation test under static load
门组合件.静载荷下的对角变形试验 |
| 2. | Study on aerial cable creep deformation test based on dsp
的架空电导线蠕变量测试系统的研究 |
| 3. | Electric connectors - crimp contact deformation test procedure
电连接器.折皱接触变形的试验程序 |
| 4. | Windows and doorsets - mechanical deformation test of edge rail
窗和门组合件.边部冒头的机械变形试验 |
| 5. | Research on consolidation deformation test of large - size soft clay samples
大尺寸软粘土固结变形试验研究 |
| 6. | Geotechnical field investigations - part 5 : borehole deformation tests
野外地质调查.第5部分:钻孔变形试验 |
| 7. | Vulcanized or thermoplastic rubber . resistance to ozone cracking . dynamic deformation test
硫化橡胶或热塑橡胶.抗臭氧开裂.动态变形试验 |
| 8. | In the last , we made a stress and deformation test to contrast with and verify the result of fea
最后对实物结构进行了应力及变形测试，对比分析和验证分析结果。 |
| 9. | Through the comparison among the result of analysis and the result of deformation testing experiment and other finite element modeling method , the rationality of the being established finite element model has been testified
通过分析结果与变形测试试验结果和其它有限元建模方法之间的对比，证明了所建立的有限元模型的合理性。 |
| 10. | The metal flowing pattern of the tooth filling process at different stages during closed die extrusion is found through lead deformation test and double - acting extrusion method on a doubled - acting press or on a special die structure with a general press is proposed
成形试验获得了金属充填齿形腔的流动模式，提出采用专用双动压力机或在通用压力机上采用特殊模具实现坯料双向挤压的成形方法。 |
